Wood Fired Large Pilgrim Jug

The term “Pilgrim Pot” makes reference to pieces from ancient times that were used as transportation water jugs or "Canteens"

Robert's large Noborigama consumes 6 cords of wood during 40 hours of constant stocking. He uses a blend of woods including Pine, Spruce, Hemlock, Oak and Maple.

Generally speaking softwoods produce a faster hotter firing, while hardwoods aid in keeping a bed of coals in the firebox.

Depending on the stage of the firing, stoking may take place as frequent as every 3 minutes. The potter must pay close attention from the first stoke of wood to the last.

Reaching the 2400 degrees F. necessary for a firing is not dependent only on the amount of wood burned. It is also the timing of each stoke, the size & species of wood, as well as the moisture content, that makes a great fire.

A kiln firing that reaches the desired temperature is no guarantee of success. Variations of flame and ash flow are impacted by how the ware was stacked prior to firing.

This jug measures 14 inches tall, 7 inches wide, and 6 inches deep.